Awesome job guys!

all working well from my end 😉

Thanks Gonna try it out

Just tried it
awesome pure awesome watched a few music videos everything seems perfect so far

Yeah, I was following the SVN changes and you really did a massive job! Thanks guys! 🙂

There may be one bug
I tried wiimc 1.1.0 seems to work great I left it on I wrote these 2 comments check my emails and stuff after it was on the screen saver after when i try to access any file i get error cant access file tried to return back(path) its says cant access(the folder) then it went to the start main menu, usb is gone tried unplug then plug wont come back had to exit and restart everything seems fine
It was only just around 10 mins i left it for,
although may try play a vid after leaving it again just to be sure
im using usb hard-drive nfts

Sorry to bring some bad news 🙁
I was so happy that the audio sync bug was corrected that I immediately updated when I saw the message in WiiMC, but since upgrading to 1.1.0 WiiMC is stuck in the “Loading. Please wait” screen…
I’ll try to install again from the SD card rather than upgrading directly to see if that solves my problem.

@faith genesis raven
if you can reproduce the problem please contact me on irc (#wiimc on EFNet) or email ([email protected])
I’ll do a special build for testing

@Tantric
Exactly… I forgot about the Channel updater… Sorry about that 🙁
And now for the happy news: everything works great with this version, including the the audio which is perfectly in sync now.
Thanks a lot for your work Tantric !!!

I use newest channel (uninstalled the old and installed the new) and newest wiimc. the Channel hangs at Loading, please wait.

I have the same problem…

Yes!
I was following the SVN changes for a while, and finally it is there!
Thanks, a lot. You guys are doing an awesome job.
Much love~

I was upgraded my channel and installed the new wiimc (1.1.0). The Channel hangs at Loading with message “Exception (DSI) occurred!”

If I enter the loader my Wii just reboots 😐 If I enter from Homebrew Channel, it works fine, but the video-playback got worse. Maybe the video source is the problem, will investigate later.

When I try to install WiiMC Channel Installer 1.5 an error occurs “Please install IOS58, then reinstall Homebrew Channel, then try it again” but I have already all of them installed…previous version worked perfect on my Wii (1.09 and Installer 1.4). Any idea?

new version is amazing. buffers divx in 0 time now over wifi smb share… and audio sync is perfect.

thanks so much.

thanks guys the youtube and live streamings are back to sync and the youtube video quality is SUPERB!!!! i really apreciate you guys and hombrew.

Channel loads my USB drive fine now. I watched a DVD for a half hour, sounded great, no weird audio. Online media loads way faster!

2 issues: One, all the files on my USB drive show up in lower cased lettering. Also, not sure if this has to do with subs being turned on, but when I selected an item from the DVD menu, the movie continued to play with a white line on the screen. As soon as I disabled subs, it went away.

Great work again everyone.

Works great, the audio is all in sync now, except there is one problem. My subtitles don’t show up anymore. They used to show up in the last version, but don’t show up anymore.

Hi Guys!

Realy great job!!!!
Unfortunately I cannot get my NAS connected. Is it the backslash which I cannot choose in adding the paths?

Please can anybody help me with this – now I am using an USB HDD – which is a pitty with such a fine NAS. I also cannot connect to the shared files on my pc. On my PC i can connect and get the map structure of the NAS – so I don’t know what is going wrong…

hmm…my credit card isnt working right now(or the paypal site maybe?), ill Donation as soon as it starts working.

i mean i’ll donate.

I updated Homebrew and updated WiiMC and the channel. Now the issue us that WiiMC won’t recognize my USB and crashes when I select various menus/settings. What am I doing wrong? Should I switch back to IOS249 after the channel is updated?

Thank you so much guys for your hard work. Is very appreciated.

this update is fantastic. it plays the .mkv files i was having troubles with flawlessly, and buffer speeds are almost non-existant all over. thanks team!

excelente trabajo!!

this version fixes problems but to payback mp4 704×396 sound desinc after 3 minutes, and most weird freeze wiimc and codedump when try video playback file (mp4,avi.wmv) for 2nd time.

ok so ive tried the download from the homebrew browser. that works, but i can only run wiimc from the homebrew channel. i tried the update from in the program=fail. i try the update from the channel=fail. i download the channel update=fail <- channel installer tells me i need ios58 installed and homebrew reinstalled, and i have already done that and the installer still demands i install 58.

It’s great but it has a few bug: titles appear in all lower case letters. It has trouble loading my NTFS harddrive and the video play back is choppy the frames get meat up.

@wishmasterf
channel 1.5 installed and having the same problem

angelele :
When I try to install WiiMC Channel Installer 1.5 an error occurs “Please install IOS58, then reinstall Homebrew Channel, then try it again” but I have already all of them installed…previous version worked perfect on my Wii (1.09 and Installer 1.4). Any idea?

I have the same issue, too. WiiMC Vers. 1.1.0 is running without any problem when started directly. But the channel update failed. I re-installed IOS 58 successfully, but the error message didn’t disappear.

I have the same issue as angelele. I tried re-installing IOS58 – but the forwarder still does not update. When started without forwarder WiiMc itself is working perfectly.

@wishmasterf
channel 1.5 installed and having the same problem…me too. solution please.

Problem with Channel Installer. Asking for IOS58 but is already installed. What to do?

Launching new version from HBC works perfectly fine.

Thx

Channel 1.5 not installing.

Asking for IOS58 and reinstallation of HBC

What to do?

91extcab :
ok so ive tried the download from the homebrew browser. that works, but i can only run wiimc from the homebrew channel. i tried the update from in the program=fail. i try the update from the channel=fail. i download the channel update=fail <- channel installer tells me i need ios58 installed and homebrew reinstalled, and i have already done that and the installer still demands i install 58.

i have got exactly the same problem

@91extcab
Had the same problem, you have to install IOS58 and than reinstall HBC. When you install HBC it shows you that IOS58 is installed.

Videoplayback in 1.0.8 is choppy for me. I watched a movie yesterday and in the upper left corner there is some weird clipping. It’s 100% not the videos fault, will try to take a picture.

thx. How do you reinstall homebrew channel? I already have it…do I delete the HBC Channel and go through Bannerbomb again…?

Problem fixed….a quick reinstallation of the HBC (now using IOS58) took care of this problem. New version is GREAT! Thx

“Unable To Obtain NAND Access. Installer Cannot Continue”

any reason why this keeps happening when i try to use the channel installer?

Problem solved, do as the popup sais to do…install (again) IOS58, re-install Homebrew (i. e.: hackmii installer)..and that’s it, works fine.

I have the same issue reported here: http://www.wiimc.org/forum/viewtopic.php?f=4&t=848 ()Resolution stretch on WiiMC interface)
Mine is a CRT PAL 16:9 TV and switching from 50 to 60 Hz doesn’t help. Width in 1.0.9 was OK.
Is the forum registration closed? Haven’t found where to subscribe.

nevermind, i fixed it. thanks.

@wishmasterf
@BadWolf
@ghoal (minus the exception error)
@albert p.

Having the same problem, unfortunately @angelele solution does not fix the issue for me, tried it several different ways, from simply reinstalling over the top, uninstalling then reinstalling to restarting after every step, nothing seems to work. Loading via HBC works fine, IOS58 is installed and HBC is using it, but the wiimc channel just hangs at “Loading please wait…”

DVD the same issues as always… Subtitles does not work! Menu neither!

THANKS GUYS!

@Skoopman

im still running 4.2u, never updated to the new 4.3u, and so reinstalling homebrew hasnt happened since first softmodding with bannerbomb. what is your suggestion as for reinstalling homebrew for me…?

Great work…

But, screen now looks…”expanded” and i miss left and right sides, like a few inches…. not viewing movies, just the whole program…

Changed video settings to default, but no way.

am I the only one?

Great work! Thanks guys!

@Yann

same here, its too wide for my tv and also, theres no online or DVD data?