DSI exception for channel and Globe Icon(wiimc)

[lazo696]

Installed IOS 58 wad and HBC 1.0.8. Everything there went well, HBC is using IOS58. I wanted to try out Wiimc and having some problems. Internet access is not enabled because this is for little kids, they don’t need it. Downloaded Wiimc Channel Installer 1.5 and went to install in HBC. Once loaded I get a message asking if I want to install the channel, select install and I get exception dsi error. I then try to load wiimc directly in HBC and loads fine but once the cursor hand hovers over the globe icon(online media?) I get the exception dsi error.
I don’t want to enable internet access, anyway to fix this?

Found 102 titles.

Found 39 IOS on this console. 10 of them are stub.



IOS3 (rev 65280): Stub

IOS4 (rev 65280): Stub

IOS9 (rev 778): No Patches

IOS10 (rev 768): Stub

IOS11 (rev 256): Stub

IOS12 (rev 269): No Patches

IOS13 (rev 273): No Patches

IOS14 (rev 520): No Patches

IOS15 (rev 523): No Patches

IOS16 (rev 512): Stub

IOS17 (rev 775): No Patches

IOS20 (rev 256): Stub

IOS21 (rev 782): No Patches

IOS22 (rev 1037): No Patches

IOS28 (rev 1550): No Patches

IOS30 (rev 2816): Stub

IOS31 (rev 3349): No Patches

IOS33 (rev 3091): No Patches

IOS34 (rev 3348): No Patches

IOS35 (rev 3349): No Patches

IOS36 (rev 3351): No Patches

IOS37 (rev 3869): No Patches

IOS38 (rev 3867): No Patches

IOS50 (rev 5120): Stub

IOS51 (rev 4864): Stub

IOS53 (rev 5406): No Patches

IOS55 (rev 5406): No Patches

IOS56 (rev 5405): No Patches

IOS57 (rev 5661): No Patches

IOS58 (rev 6176): No Patches

IOS60 (rev 6400): Stub

IOS61 (rev 5405): No Patches

IOS70 (rev 6687): Trucha Bug, NAND Access

IOS202 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0

IOS222 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0

IOS223 (rev 4): Trucha Bug, ES Identify, NAND Access, USB 2.0

IOS249 (rev 14): Trucha Bug, ES Identify, NAND Access, USB 2.0

IOS250 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0

IOS254 (rev 65281): BootMii

[rodries]

This is a bug in HBC caused by it trying to initialize the network even though you don’t have one! In the meantime, you’ll have to load from the channel to avoid the crash. How to install the channel then, you ask?

Load HBC, and then wait there for awhile (10 minutes perhaps?) By this time it will have stopped looking for the network. You can then load the channel installer successfully (or WiiMC for that matter) without the crash.

[lazo696]

It worked! Waited for exactly 10min and ran the installer. When the channel finished installing I was going to select ok but once the cursor hovered over the ok button the wii froze…. forced a shutdown and the channel is there and its working fine now.
I have another question. Is it possible to lock a directory so someone can’t go up/down levels?

[Author]

Posts