USB Problems? Read This!

[Anonymous]

@rodries wrote:

@LeahCim wrote:

Please test this wiimc and comment: http://www.mediafire.com/?2ezq1ud231qbnm6

Hi Rodries,

This version of Wiimc detects my HD immediately. The latest official release takes around 10 seconds before the HD appears.

lost101

[ghinc]

I reinstalled ios58 and HBC. The test ran this time. The log is attached.

3TB Western Digital MyBook Essential

[PhatP]

Wiimc has been stuck in an endless update loop saying an update was available every time I ran it – but I’m on 1.1.1 .

Also, didn’t recognise my WD Elements 1TB drive although has been working fine with USB pen drives. Geebox does see the drive straight away although the interface is awful 🙄

I downloaded the test version of WiiMC and that hasn’t made a difference although after reading narciso’s post I unplugged and then plugged back in the hard drive’s PSU and WiiMC found it right away.

Not perfect but at least I know there is a way for WiiMC to see my NTFS partition.

[NeoWii]

Hi,

new log with 1.9

[aka107]

Ok new test for everyone: http://www.wiimc.org/files/USB%20Test%201.10.zip
@unclenoriega wrote:

I reinstalled ios58 and HBC. The test ran this time. The log is attached.

3TB Western Digital MyBook Essential

Execute the new usb test

@svenski wrote:

Wiimc has been stuck in an endless update loop saying an update was available every time I ran it – but I’m on 1.1.1 .

Also, didn’t recognise my WD Elements 1TB drive although has been working fine with USB pen drives. Geebox does see the drive straight away although the interface is awful 🙄

I downloaded the test version of WiiMC and that hasn’t made a difference although after reading narciso’s post I unplugged and then plugged back in the hard drive’s PSU and WiiMC found it right away.

Not perfect but at least I know there is a way for WiiMC to see my NTFS partition.

Execute the usb test

@dyrg wrote:

Hi,

new log with 1.9

Your device must work with last beta: http://www.mediafire.com/?2ezq1ud231qbnm6

@rodries wrote:

@Rignog wrote:

Reply from the Email you guys sent me, tried the 1.9 usb tests and still not looking good all failed just incase im useing LACIE Minimus 1TB USB with ext power supply. i have attached the results 🙂 Thanks for keeping this up peeps.

I don’t know what to do to initialize your device. I’m going to do a special usb test only for you, testing a lot of combinations. I’ll ping you when I finish that test.

Rignog, execute new test

[NeoWii]

@rodries wrote:

Ok new test for everyone: http://www.wiimc.org/files/USB%20Test%201.10.zip
@dyrg wrote:

Hi,

new log with 1.9

Your device must work with last beta: http://www.mediafire.com/?2ezq1ud231qbnm6

Ok, with this release my HDD is well detected !!
Thank

Log with v1.10

[Dag Wieers]

As requested a new test, hadnt the chance to quit the wakeup test, cause it never started it..

[aka107]

@turley wrote:

As requested a new test, hadnt the chance to quit the wakeup test, cause it never started it..

Interesting log
I need you download another test: http://www.wiimc.org/files/USB%20Test%201.11.zip
I’ll get more info about your device config
The trick is that the usb driver read 5 devices, and only the last device can be initiated, but sometimes only read 4 devices then the driver can’t initiate the device.
In this test I’ve added some sleeps to try to fix the detection problem and I’ve added more info in the descriptors.

[mrkazador]

I have tried to use both new test programs 1.10 and 1.11 but all i get a black screen and no resonce from my wii. any ideas guys?

[mrkazador]

OMG!!!! as my prev post the tests wouldnt workd so tried the latest beta (just on the off chance) AND IT WORKS!!!!!! Good work guys, youve made me a very happy man 🙂

[ASTUR2000]

@rodries,
whatever you did to your latest Test-App versions (1.10, 1.11) made them unusable on all my 3 Wii’s. (the screen goes black an the wiimote turns off)
The Test-App (1.09) worked fine, but the log looked still the same as in my previous post

[james4204]

Drive passed all tests it seems. Did not bother waiting more than 5 seconds after plugging in drive before pressing A, seems not to matter for my drive (wear and tear be damned lol).

Some Information about my drive:
-My Book Essential Edition 2.0
-Model# WD10000H1U-00
-Website: http://support.wdc.com/product/install.asp?groupid=110&lang=en

-[]D

[aka107]

OK I’ve found the problem in the last usb tests
Please download usb test program again: http://www.wiimc.org/files/USB%20Test%201.11.zip

Test & report.

[Dag Wieers]

new test, again no wakeup test possible

[ASTUR2000]

tested 4 different drives with your new app version.

1.Seagate FreeAgent Go 1TB: passed
2.WD My Passport Essential 500GB: passed
3.ChilliGreen 400GB: passed
4.SAMSUNG 250GB: failed (problem child from here) Mayby it helps you to know the drive works flawless in hbc?

[Author]

Posts