[Greek2U]

ok, replying to myself

I just found where was the linking problem. The configuration failed because it couldn’t find the crosscompiler tools so the compiled *.a resulting files were “incompatible” for LD. I had to add c:devkitProdevkitPPCbin; to the PATH environment variable. Then the linikage works just fine.
So to others who might hit simmilar problem: If the powerpc-eabi-* checks in config.log fail make sure you have setup the proper path to the devkitPPCbin folder.

[Greek2U]

Hello guys,

I can report exactly the same issue as pilou. Everything compiled fine but there is some problem with linking.
All the needed libs from wiimc/libs/ compiled and installed OK but LD chokes on them from some rason.

I’ve spent several hours on it yesterday ended up with completely clean reinstall of all tools but no luck so far :-/

Here is the generated wiimc.elf.map content until it errors out if it can be helpful to solve the issue:

http://cyphre.mysteria.cz/stuff/wiimc.elf.zip

Any help is appreciated.

[Author]

Posts