[mattyoung1979]

This could be possible, I re-partitioned the harddisk some time ago, but it works perfect in windows.
It is devided in 2 partitions, both NTFS, one of 300 GB and one of 700 GB.

Is there an other way to check if that’s the problem, beside moving everything to another harddisk and reformatting the drive?

Thank you for all the help, I feel like we’re getting somewhere:)

[mattyoung1979]

I tried youre selfcompiled wiimc dol, and it didn’t make any difference. When I start wiimc, the harddisk isn’t displayed. When I close wiimc, the screen goes black and I have to reset the wii.

When I go to ‘Options’ in Wiimc, when the harddisk is connected, and then I return to the mainscreen, wiimc tries to save, but it doesn’t succeed, it’s stuck again, reset again…

I did the test with the usbdol. (only the one that you have to wait 20 min, i didn’t have time for. Do you need it?

Here is the log:

USB2 device test version: 1.4
=============================
USB2 device test method: 0

---

__usbstorage_IsInserted
USBStorage_Open
USB_OpenDevice, ret: 0
Found device, InterfaceSubClass: 6
USB_SetConfiguration ok
USB_SetAlternativeInterface ok
__usbstorage_reset, ret: 8
USBStorage_Open, USBStorage_Reset: 8
USBSTORAGE_GET_MAX_LUN, ret: 9 max_lun: 1
GetMaxLUN: 1
__usbstorage_clearerrors Ok
USBStorage_ReadCapacity: 0 sector size: 512
USBStorage_MountLUN(0) Ok
USBStorage_Read sector: 0 num: 1
usbtimeout = 10
USB_ResumeDevice ret: -4
__usbstorage_clearerrors ret: 0
USBStorage_StartStop ret: 0
USBStorage_Read __cycle ret: 512 status: 0
usbtimeout = 2
Read sector 0 ok
USB Device Compatible!!!
USB2 device test method: 1

---

__usbstorage_IsInserted
USBStorage_Open
USB_OpenDevice, ret: 0
Found device, InterfaceSubClass: 6
USB_SetConfiguration ok
USB_SetAlternativeInterface ok
USBSTORAGE_GET_MAX_LUN, ret: 9 max_lun: 1
GetMaxLUN: 1
__usbstorage_clearerrors Ok
USBStorage_ReadCapacity: 0 sector size: 512
USBStorage_MountLUN(0) Ok
USBStorage_Read sector: 0 num: 1
usbtimeout = 10
USBStorage_Read __cycle ret: 512 status: 0
usbtimeout = 2
Read sector 0 ok
USB Device Compatible!!!
USB2 device test method: 2

---

__usbstorage_IsInserted
USBStorage_Open
USB_OpenDevice, ret: 0
Found device, InterfaceSubClass: 6
USB_SetConfiguration ok
USB_SetAlternativeInterface ok
__usbstorage_reset, ret: 8
USBStorage_Open, USBStorage_Reset: 8
USBSTORAGE_GET_MAX_LUN, ret: 9 max_lun: 1
GetMaxLUN: 1
__usbstorage_clearerrors Ok
USBStorage_ReadCapacity: 0 sector size: 512
USBStorage_MountLUN(0) Ok
USBStorage_Read sector: 0 num: 1
usbtimeout = 10
__usbstorage_clearerrors ret: 0
USBStorage_Read __cycle ret: 512 status: 0
usbtimeout = 2
Read sector 0 ok
USB Device Compatible!!!

Thank you!

[mattyoung1979]

Thx, i will try it as soon as possible and post the reply.

Thank you!

[mattyoung1979]

Strange. I hope the next update will fix it.

[mattyoung1979]

Thx! I will try it!!

[Author]

Posts